- Position the vehicle on the lift.1. Undo the bolt fixing the canister shield and handbrake mounting bracket (1a) and remove the split pin (1b).
Engines: 2.0 16V Equipment / version codes: BIPOWER [200]
Op. 1076A52 EXHAUST PIPE REAR HEAT SHIELD - R.R.1. Disconnect the handbrake cable from the rear brakes.2. Disconnect the handbrake cable from the idler.3. Using a drill with a suitable helical point, remove the fixing rivets.4. Remove the linkage rear idler.
Engines: 2.0 16V Equipment / version codes: BIPOWER [200]
- Fit the handbrake linkage rear idler and, using a new riveter and new rivets, fasten it to the bodyshell.- Connect the handbrake cable to the idler.- Connect the section of the handbrake cable with the rear brakes to the idler. Op. 1076A52 EXHAUST PIPE REAR HEAT SHIELD - R.R.- Position the handbrake cable and connect the two sections positioning the split pin.- Tighten the bolt fixing the canister shield and handbrake mounting bracket.
